35mm Rise Front Mount Adjustable Angle Clipon Risers (with special 1" bars)
Woodcraft 3-piece split clipon risers are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are available in both 12 and 13.5 inches lengths and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash because these risers use an inexpensive universal handlebar. Having an adjustable bar angle that uses a standard bar is a difference that will make your riding experience better!
These clipons have a 35mm rise over a conventional race clipon PLUS they have an adjustable bar angle between 2 and 12 degrees. The 35mm designation is not a rise over your stock clip-ons (since every stock clipon is different). This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort. Different risers can be ordered in the future if you want a higher or lower setup.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment. Want to know how to measure for Risers? Click Here.
If you have any questions please contact us at Woodcraft and we will be happy to guide you through the process for your individual motorcycle. To see our recommendations for bars please click the red link above the "Select Options" bar above.
|12-1560||5 Degree Adjustable Clipon Riser Hardware Kit
|12-5591B||Clipon Riser 35mm Front Mount Adjustable Clamp Set (L/R)|
|13-4101 - QTY: 2||13-4101 12.75 inch (1" o.d.) Replacement handlebar assembly-...